en
$

Adjustable 0-22mA -10V-10V Signal Generator Simulator

    0 reviews / Write a review
$18.78
Price in reward points: 187
  • Product Code: JS-VISG-M-S
  • Reward Points: 2
  • Availability: In Stock

Available Options

Tags: 0-20mA 0-10V Generator , QH-VISG2-ED

Description

BRT LB02G (JS-VISG-M-S) New version QH-VISG2-ED/EN analog 0-22mA -10V to 10V signal generator is a portable high precision analog current voltage signal generator simulator and tester. It can output 4-20mA current source, 4-20mA passive loop, 0-10V voltage signal, etc. Its output accuracy is 0.01mA, 0.01V and output signal type and output range are programmable through the precision adjusting knob. That precision signal generator support 24V power supply through wiring terminals, 5V power supply via USB port and internal embedded battery type is available. Small pocket size refined external shell and knobs, it becomes an essential accurate calibration meter if you do not want to buy a large current voltage calibrator with higher price.


Features & Benefits

• Output range: passive or active 0/4-20mA, -10V to +10V, etc.; output range and precision are programmable and adjustable.

• Current and voltage output simultaneously, have 9 programmable fast output points.

• Have 2-wire, 3-wire, 4-wire active or passive current outputs.

• Multiple programmable output range: -10V-+10V, 0-3.3V, 0-5V, 1-5V, 4-20mA, 0-20mA, 0-22mA etc.

• Programmable multiple display mode: current voltage value display, 0-100% display, 0-50.0Hz display.

• Small pocket size, put it in your pocket, very convenient to carry, save cost.

• Support 24V operating power supply via wiring terminals and 5V from USB port, can be used in indoors or outside industrial site.

• 1000mAH 3.7V re-chargeable battery embedded inside, very convenient to use.

• High precision 0.01V, 0.01mA output and LED display output signal value accurately.

• Have rough and fine adjusting modes, the rotation turns is settable.

• Output terminals have short-circuited protection; power supply terminals have polarity reverse connection protection.

• Pluggable wiring terminal blocks, very convenient to do wire connection.

• Infinite rotation knob, high accuracy long life span encoder to adjust output. Much more stable and accurate than the potentiometer type.

• Small comfortable external shape: 100x60x20mm, can be put into pocket.

Technical Parameters

Current output
max. 0-22mA adjustable through button, have fast output function
Current output accuracy
0.01mA, can be calibrated
Current sampling resistance
10-500Ω, can be short-circuit.
Voltage output
-10V to +10VDC adjustable through button. have fast output function
Voltage output accuracy
0.01V, can be calibrated
Voltage output current
max. 100mA, have short-circuit protection
Operating power supply
15-30V external power supply via wiring terminals; 5V micro-USB power supply; 1000mAH re-chargeable battery inside (optional).
LED display
4 digits, two decimal points
Display mode
Current/volt. value display; 0-100% percentage display; 0-50.0Hz display.
Adjusting mode
One turn: 20 x pulses, precision encoder.
Power consumption
External 15-30V power supply: about 1W; Micro USB 5V power supply: 0.2A/1A
Dimension
L x W x H: 100x60x25mm
Operating temperature
-20 to +50℃
Storage temperature
-25 to +80℃
Humidity
80% R.O. non-condensation


Wiring Circuits
Output Range/Adjusting Mode/Display Mode Programming

Figure 1→2:Press and hold Knob 2 Seconds till displays parameter code: “F001”;

Figure 2→3: “+”One Pulse, Display“- - - -”;
 
Figure 3→4:Input Password “+ - - +”, Display“= = = =”;
 
Figure 4→5: Press “OK”, If password is correct, displays “F002”, Otherwise displays “Err” and Exits;
 
Figure 5→6: Rotate Knob till displays “F006”;
 
Figure 6→7:Press The "OK" to set the value of “F006”, and then modify the value so that the
 
actual output equals to the display value before entering The Setting;
 
Figure 7→ : Press “OK” to Save. Otherwise parameters will not be save if there are no actions taken for more than 10 seconds.

* Its output range and display mode setting methods are the same to that steps above, please contact us to get user manual.

Testing Show

Additional information

General Specifications
Output Max. 0-22mA, -10V to +10V switchable
Highlights Have 9 x fast output points; high precision; programmable.
Power Supply External 15-30Vdc operating power supply; 5V micro USB port; internal ebedded battery optional
FAQ
Packing List 1 Unit x New Version JS-VISG-M-S Analog 0-20mA 0-10V Generator for PLC Inputs. 1 Unit x USB Cable for Power Supply. 1 Set x Professional User Manual.
How to buy? Select parameters and quantity ----> Click Button" Add to cart" —-> then Button "View cart"—->go next step accordingly.
About Shipping Shipped by DHL, Fedex, TNT, EMS or Post Registered Airmail Parcel.
Payment Methods >>A. Credit Card, Visa Card, Master Card, etc online payment. >>B. Credit card payment through Paypal secured if Paypal service is available in your country. >>C. Paypal online payment secured if you have a Paypal account.
Why Choose Us? -More than 5 years practice. -Various full range. -MOQ 2 Units -Factory direct price. -24 months warranty.

Reviews (0)

Write a review

Please login or register to review

Related Products